Ltsp.conf

מתוך organicwiki
קפיצה אל: ניווט, חיפוש
  1. Copyright (c) 2003 by James A. McQuillan (McQuillan Systems, LLC)
  2. This software is licensed under the Gnu General Public License.
  3. The full text of which can be found at http://www.LTSP.org/license.txt
  4. Config file for the Linux Terminal Server Project (www.ltsp.org)

[Default]

       SERVER             = 192.168.10.110
       XSERVER            = s3

X_MOUSE_PROTOCOL = "IntelliMouse" X_MOUSE_DEVICE = "/dev/ttyS0"

       X_MOUSE_RESOLUTION = 400
       X_MOUSE_BUTTONS    = 3

X_MOUSE_EMULATE3BTN = N

       USE_XFS            = N

SCREEN_01 = startx #SCREEN_01 = startx #SCREEN_02 = shell

# change to [Y] enable sound by default

       SOUND              = N
       # choose either esd or nasd to be the default

#SOUND_DAEMON = "nasd" SOUND_DAEMON = "esd"

       # default sound volume
       VOLUME             = 65

SMODULE_01 = sb #SMODULE_01 = soundcore #SMODULE_02 = uart401 #SMODULE_03 = snd-sb16 io=0x220 irq=7 dma=1

       ### For ISA sound cards, you have to specify the module to use:

#SMODULE_01 = "snd-es1688 io=220 irq=5 dma=1"

       #SMODULE_01       = "sb io=0x220 irq=10 dma=1"

X_MODE_0 = 800x600 40 800 840 968 1056 600 601 605 628 +hsync +vsync

  1. X_MODE_0 = 1024x768 65 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
  2. X_MODE_0 = 1024x768 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
  3. X_MODE_0 = 800x600 50 800 856 976 1040 600 637 643 666 +hsync +vsync
  4. X_MODE_0 = 1024x768 75 1024 1048 1192 1296 768 771 777 806 -hsync -vsync

XKBSYMBOLS = "us(pc101)"

       XKBMODEL           = "pc101"
       #XKBLAYOUT          = "us"

XKBLAYOUT = "us,il" XKBRULES = "xorg" XKBOPTIONS = "grp:alt_shift_toggle,grp_led:scroll" #XKBVARIANT = ",lyx"

#RCFILE_01 = floppyd LOCAL_DEVICE_01 = /dev/hdb:cdrom LOCAL_DEVICE_02 = /dev/fd0:floppy

ALLOW_SHUTDOWN = Y X_DONTZAP = false

[00:e0:4c:2c:2f:bc]

  1. [ws002]

SCREEN_01 = shell

#RCFILE_01 = rc.localdev2

[00:e0:4c:00:75:dc] X_MOUSE_DEVICE = "/dev/ttyS1"

[00:e0:4c:00:75:bf]

  1. [ws022]
   PRINTER_0_DEVICE   = /dev/lp0
   PRINTER_0_TYPE     = P              # P-Parallel, S-Serial

[00:e0:4c:1c:28:fc]

  1. [ws008]

# change to [Y] enable sound by default

       SOUND              = Y
       # choose either esd or nasd to be the default

#SOUND_DAEMON = "nasd" SOUND_DAEMON = "esd"

       # default sound volume
       VOLUME             = 65

SMODULE_01 = sb

כלים אישיים
גרסאות שפה
מרחבי שם
פעולות
ניווט
תיבת כלים